HOW TO APPLYHOW TO APPLY HIGH-TECH DECALS

* Cut out decal from the decal sheet.

* Dip the decal into water.

* Place decal into position.

* Bend a corner of the carrier film. DO NOT bend the decal by itself, only the carrier film.

* Press decal gently down with a soft cloth until excess water and air bubbles are gone. Let the decal dry overnight.

* Once dry, remove the carrier film, pulling it off starting from the cornered edge with tweezers. If the decal comes with the carrier film that means it's not dry enough. In that case apply moisture with a wet finger to get back the decal into position, let it dry and repeat the process. You can also apply Scotch tape over the decal. Peeling the tape off, the carrier film will come with it.

* Any excess of glue of the carrier film that might stay onto the body can be removed with water.